Mechanical Anchor

  • High Performance Anchor

    High Performance Anchor

    Application

    · Excellent tensile and shear resistance
    · Unique compression ring design is conducive to better tightening effect
    · Mainly used for column feet, equipment fixing, etc.

    Material
    · 8.8 grade high-strength carbon steel, stainless steel, etc.
    · Electro-galvanized (≥5μm), hot-dip galvanized (≥45μm)

     

  • Hammerset Anchor

    Hammerset Anchor

    The hammerset anchor is an internal thread anchor made from zinc-plated and stainless steel, is ideal for anchoring sprinkler systems, cable trays, and cantilevers both inside and outside. 

    The hammerset anchor is mounted with the hammer flush to the base material. The embossed rim prevents slipping. The sleeve is expanded and braced against the drill hole wall through the driving in of the internal pin.

  • Undercut Anchor

    Undercut Anchor

    The post-reaming type anchor means that after the straight hole is drilled in the concrete base material, the hole is re-reamed at the bottom of the hole. The reamed cavity and the open key sheet of the anchor form an interlocking mechanism to realize the post-anchor connection.

    Product Features:
    Suitable for anchoring on cracked concrete with the highest safety requirements, resistant to vibration loads and shock loads.
    It has extremely high bearing capacity, and the anchoring effect is equivalent to that of embedded parts.
    Small torque can be tightened to carry, complete built-in mechanical lock effect.
    Accommodates variable anchorage depths and variable fixture thicknesses.
    No expansion stress, the initial stress applied to the concrete substrate is small, and it is suitable for small margins and small spacings.

    Scope of Application
    1. The rear-expanded bottom anchor has a strong anchoring effect and is suitable for occasions with high safety factor requirements.
    2. It is suitable for the installation and fixation of large-scale equipment in industrial conveying systems and hoisting systems.
    3. It is suitable for linking and fixing of curtain wall;
    4. Installation and fixing of various pipelines and cable brackets such as railways, tunnels, bridges, etc.
    5. Installation of various anti-theft doors, anti-theft windows and fire doors
    6. Installation and fixing of various pipes in civil buildings

  • Wedge Anchor Expansion Bolts

    Wedge Anchor Expansion Bolts

    - ZINC PLATED – Helps prevent rust in dry environments

    - WIDE RANGE OF SIZES – Could customizable according to customers’ requests

    - PACKAGED WITH NUTS AND WASHERS – Fast, quick, complete installation

    - HOLE SIZE IS ANCHOR SIZE – Simplicity and ease of installation

     

    Material: Carbon Steel Zinc Plated or Stainless Steel

     

    Applications
    The anchor is made from Carbon Steel, and is Zinc Plated. This anchor is designed for use in Concrete only, and should never be used in block or brick base material.

     

    Environment
    The anchor is designed for use in a Dry environment.

     

  • Concrete Screw Anchor Bolt

    Concrete Screw Anchor Bolt

    UK Prudential concrete anchor is a high-strength screw anchor for concrete and masonry.

    It is designed for optimum performance in both cracked and uncracked concrete.

    The high-strength, easy-to-install concrete anchor has been tested and shown to provide outstanding performance in cracked and uncracked concrete under both static and seismic loading conditions.

    The self-undercutting, non-expansion characteristics of the UK Prudential concrete anchor make it ideal for structural applications, even at reduced edge distances and spacings.

    Recommended for permanent dry, interior non-corrosive environments or temporary outdoor applications.

     

    - Qualified for static and seismic loading conditions
    - Thread design undercuts to efficiently transfer the load to the base material
    - No special drill bit required; designed to install using standard-sized ANSI tolerance drill bits
    - Hex-washer head requires no separate washer and provides a clean installed appearance
    - Carbon steel utilizes a specialized heat-treating process that creates tip hardness for better cutting without compromising the ductility
    - Mechanical galvanizing intended for some pressure-treated wood sill plate applications; not for use in other corrosive or outdoor environments
    - Size: 1/2 in. x 6 in etc., customizable according to customers’ requests

    *Caution: Use a UK Prudential concrete screw anchor one time only – installing the anchor multiple times may result in excessive thread wear and reduce load capacity

  • Self-drilling Concrete Screw Anchor

    Self-drilling Concrete Screw Anchor

    The UK Prudential concrete screw has excellent tensile and shear properties. It’s mainly used for railings, brackets, light equipment etc. Material 10.9 grade high strength carbon steel, stainless steel etc. Electro-galvanized, hot dip galvanized as optional.