PCA-PRO Glass Capsule

A glass-encapsulated resin cartridge used with chemical anchors. Containing resin and hardener, it is inserted into the drilled hole; the rod is then driven in, breaking the capsule and mixing the components to cure the anchor.

Product Certification：
Load capacity report / Material analysis report / 240-hour salt spray test report / Thread accuracy report / CE certification

Scope of application：
Suitable for concrete and dense natural stone. With matching rods it provides post-installed anchoring for curtain walls, equipment supports and steel structures.

Product Advantages

Pre-measured resin, high bond strength

Resin, quartz sand and hardener are pre-sealed in the glass tube. Driving in the rod breaks the capsule and mixes the components automatically; the crushed glass acts as aggregate. Once cured, the rod bonds tightly to the hole wall with excellent pull-out and shear capacity.

No expansion pressure, wide installation range

Chemical bonding creates no expansion pressure and does not damage the concrete. Safe at small edge distances and tight spacings, in both cracked and non-cracked concrete, for curtain walls, steel structures and equipment bases.

Sealed individual packaging, convenient and stable

The sealed glass tube keeps resin and hardener apart and allows visual inspection of the resin. Each capsule is pre-proportioned, so no on-site mixing is needed. Fast curing, acid and alkali resistant, anti-ageing. One person can complete the installation; excellent seismic and fatigue performance.