PUE-UD Cast-in Anchor
The Prudential cast-in anchor uses a stress-free design with a shallow embedment. It can be tied to reinforcement and needs no on-site drilling. Suitable for cracked and non-cracked concrete, with a choice of corrosion-resistant materials for optimised spacing, efficient construction and reliable capacity.
Product Certification：
Load capacity report / Material analysis / CE certification
Scope of application：
Suitable for structural connections, curtain wall and precast element installation, and rear bracket fixing on external walls.
Product Advantages
Stress-free cast-in design for flexible layout
The stress-free cast-in structure requires smaller edge distances and spacings between anchors, so component layout is not constrained by strict spacing rules.
No on-site drilling, efficient and simple
Positioned before the concrete is poured, eliminating later drilling, avoiding the risk of hitting reinforcement, simplifying the process and shortening site time.
Excellent capacity, wide material choice
Can be tied to the reinforcement cage to share loads and increase pull-out resistance. Suitable for cracked and non-cracked concrete, with stainless steel and other corrosion-resistant options for different environments.
Technical parameters
| Material | 304、316 |
| Substrate | Cracked concrete、Non-cracked concrete |
Specification and Model
| Product model | Internal thread dia. φ (mm) | Internal thread length ht (mm) | Sleeve OD d (mm) | Cross-pin depthh（mm） | Rod lengthl（mm） |
|---|---|---|---|---|---|
| M6/10/30 | M6 | 15 | 10 | 35 | 35 |
| M8/12/35 | M8 | 15 | 12 | 40 | 40 |
| M10/16/44 | M10 | 20 | 16 | 40 | 44 |
| M12/18/50 | M12 | 30 | 18 | 50 | 50 |
Operating Instructions
Related Products
